Home » Holidays in Russia » DIY winter fishing rod, options for homemade fishing rods. How to make a winter fishing rod with your own hands How to make a fishing rod for winter

DIY winter fishing rod, options for homemade fishing rods. How to make a winter fishing rod with your own hands How to make a fishing rod for winter

Despite the fact that today you can find almost any gear on sale, many fishermen prefer to make it themselves. This will allow you to create what you want.

In rare cases, however, when a fisherman lives in a rural area and has no choice, he makes a fishing rod not because he wants to, but because there is an urgent need for it.

One way or another, this is a simple task, it will not take much time and effort, so you can easily do it. It should be said that all fishermen have in their arsenal something from which to make fishing rods with their own hands, so you don’t even have to spend money on equipment.

Considering that the jig version is in great demand, we will primarily talk about it. The presented homemade winter fishing rod is one of the lightest. In addition, to manufacture the element you will not need to buy any expensive parts.

You will need to obtain in advance:

A set of cambrics.
Styrofoam (it should be dense) or a champagne cork.
A knitting needle made of plastic (an element from an umbrella will do) or something else.
X-ray or lavsan.
Multi-colored markers.
Glue.

It’s worth saying right away that nods will not be given much time, because this is a separate and large topic. It is only necessary to say that if a rewinder is being made, then for this gear it is most advisable to cut out the elements from X-ray film or lavsan. As for the fasteners, they are made from cambrics of various diameters.

Everything is done like this:

First, the handle of the tackle is turned. To do this, you need to take polystyrene foam or cork. To do this, you need to chamfer a little on one side to get something similar to a “skirt”. Next, you need to drill a small hole in the cork, into which you will then need to insert and glue the whip. It must be said that the whip can be attached to the handle in two ways. The first is on the side of the cylinder, and the second is at the end of the plug. In the first case, you can drop the turns of the fishing line, which will help when landing large fish.
At the next stage, the nod is mounted.
Next you need to reel in the fishing line and tie a jig to it.

It is worth noting that in the attached version, when you plan to fish with a jig, the fishing rod will have a somewhat more complex design than was described above. So, the handle is cut out of wood, cork or foam and has the shape of a staple. Experienced people call her “filly.” It will be necessary to cut a groove in it in order to wind the fishing line, resulting in a kind of reel. As for the front end, a hole is drilled in it for the whip.

If you are making such gear, then in this case it is better to buy a whip in a store. Some fishermen, however, use a knee from broken rods as a product or use a twig from a tree. Although it is advisable not to skimp on the whip, especially since it is inexpensive.

As for the nod, it can be made from film (lavsan or x-ray), plastic bottle or metal spring. The nod holder is made from high-voltage automotive cable or casings.

How the supply is made

Many fishermen call the supply universal, because its use is very different. Based on the presented design, there is a chance to easily assemble with your own hands an option for the current, an option with a float, a fishing rod for light trolling, for catching many types of fish. Fishermen use a wide variety of materials that are not a problem to find even at home.

The process itself boils down to the following:

Take a pipe made of plastic. A product diameter of 15 mm is sufficient. After this, you will need to cut off a small piece of the part (about 15 cm is enough). At the next stage, it will be necessary to attach a coil or two wire staples to the front, which will be folded with a reel.
To prevent the handle from getting cold, synthetic isolon should be glued to it, but only on the outside with the side where there is no foil. Styrofoam or cork would also be suitable.
Next you will need to plug the ends of the tube with plugs. If the tackle will be used in the current, then it will be necessary to lay down the load in advance so that the product does not tip over.
After this, you will need to drill a hole in the front of the tube where you will need to place the whip. The element is inserted exactly as described in the jig version.
Then you will need to make the legs. This is made from a piece of plastic, wire, etc.

If necessary, a homemade winter fishing rod can be equipped with guide rings or a nod.

Option for glitter

They are made almost exactly the same way as the supplies. True, in this case it is necessary to pay a little more attention to the creation of the element, because bait will be used and large fish will be caught.

I would like to say right away that the handle can be made from the handle of an umbrella, a plastic tube or a garden sprayer. If you come across something different, but similar, that will be great. The most important thing is to make the handle warm so that the element does not cause discomfort in winter. Therefore, it is better to use a cork. To begin with, you will need to carefully crumble it, then coat the tube itself with glue along the length of the handle, leaving at the same time a place where the coil will be installed. Next you will need to roll the element over the crumbs. When everything is dry, you will need to make another layer, it is done in the same way.

When the desired thickness is achieved, the handle can be considered ready. However, after this you will need to process the element with a rasp, file and sandpaper so that the handle is soft. Next you will need to attach the reel, but for this you will need to attach a reel seat made of two clamps to the tube (the legs must first be clamped between them). To prevent hand contact with metal, it is recommended to wrap a little insulating tape on top.

Important! It is impossible to make a reel at home with your own hands, so this element will need to be purchased at the shopping center.

It is important not to forget to seal the ends of the handle with plugs. At the same time, in the front part you will need to make a hole for the whip. The length of the element should be within 60-70 cm. Next, you will need to attach three passage rings to the whip. A tulip is mounted on the tip, and the rest are distributed along the length of the form. For fastening, you can use fishing varnish, thread or glue. If desired, a nod is attached.

This is how easy it is to make a winter fishing rod with your own hands. The process is quick and quite simple. Homemade winter fishing rods are an opportunity to create excellent tackle that will always be useful.

Making winter fishing rods with your own hands is easy. In addition to economic benefits, it is the realization of creative potential and testing of new ideas. All you need is patience and accuracy.

The decision to make a winter fishing rod yourself arises for several reasons:

Economic. Often cheap products turn out to be of poor quality, and good quality products are expensive.
Creative. Testing a new material for making a product, improving the design, coming up with a new design is the realization of creative potential.
Increased skill. Many fishermen like to make their own tackle. It is better to start with simple products that do not require the use of special tools.
Lack of fishing store.
Lack of required model in the store.

For whatever reasons the angler decides to make a homemade product, there are several points to consider:

Even making a simple product requires time, patience and meticulousness.
It is better to remake a poorly made product than to experience difficulties in using it or to be disappointed in the design.
You should not rush and save time during production. If the fisherman has a shortage of time, it is better to use a purchased product.

Winter fishing rods are not too difficult to make. There are three types of active fishing in winter:

fishing with bloodworms and jigs, without a reel;
float fishing;
flashing

Each type of winter fishing requires its own equipment.

Fishing with bloodworms and jigs

The most common purchased fishing rod options are: balalaika And filly. Options for independent products - imitation of the balalaika and filly, as well as numerous versions of known and unknown handmade designs.

Winter fishing rod with a handle - line storage made of cork or foam

The fishing rod consists of the following elements:

Pen- forest storage made of cork or polystyrene foam.
Made from champagne cork:
- in the cork, a channel is cut out with a knife for storing fishing line at a distance of 1/2 cm from the edge, ½ cm deep and wide;
- On the other side of the plug, a transverse hole is drilled for the whip. The diameter of the hole should be 10% less than the maximum diameter of the whip.

Expert opinion

Knipovich Nikolai Mikhailovich

Important! When using rigid foam instead of cork, the foam is first processed with a knife and sandpaper to give it a cylinder shape. Further processing is identical to operations with cork.

Whip.
The length of the whip is 30-50 cm. It must be flexible and durable.

Use:
- the knee of an old fishing rod or spinning rod, cut to length if necessary;
- plastic knitting needle;
- processed juniper branch;
- Rings should be installed on the whip every 10-15 cm to eliminate sagging line. You can use ready-made commercial fishing rod rings or rings from an old fishing rod.
You can make rings yourself from ferrous wire 0.6-1 mm:
- wind the wire onto any cylindrical object of suitable diameter two turns;
- bend the ends of the wire perpendicular to the plane of the ring in opposite directions;
- cut off the excess wire with metal scissors, leaving 1-2 cm at both ends;
- screw the rings to the whip with thin, harsh threads, turn to turn;
- coat the joints with waterproof glue.
Nod.
The nod should provide an attractive game of the bait.

Available materials for making a nod:
- PETT container for drinks;
- polyethylene canister;
- old fluorographic photograph;
- clock spring.
Manufacturing process:
1. A conical strip is cut with the following parameters: length 10-14 cm, narrow part 2-3 mm, wide part 4-5 mm.
2. The easiest way to make rings for passing fishing line (2-3 pieces) is this way:
- attach the rod of a ballpoint pen or a piece of wire of the required diameter to the nod blank in the right place;
- put a cambric on top from a heat-shrinkable tube of suitable diameter (cambric length 2-6 mm);
- carefully heat the cambric. The cambric will tightly cover the nod and the rod on top of the nod;
- pull out the rod.
To pass the line through, instead of cambric, it is better to make a hole at the end of the nod at a distance of 3-5 mm from the edge.
Attaching the nod to the whip. The nod is attached to the whip with the wide end.

A silicone tube 3-4 cm long is tightly placed on the end of the whip. A flattened section of the rod from a ballpoint pen, 3-4 cm long, is glued to the bottom of the tube to pass the fishing line. The tube is lubricated with Vaseline or silicone ointment. The nod is placed from below to the rod;
A silicone tube of larger diameter is tightly placed on top.

The nod can be moved back and forth between the tubes, adjusting the length of the nod and the stiffness of the guard.

Expert opinion

Knipovich Nikolai Mikhailovich

Zoologist, hydrobiologist. I am interested in fishing at a professional level.

Attention! It is difficult to cut a watch spring. You have to grind it by hand or using a drill and a grinding wheel.

Making a winter fishing rod with a cork or foam handle takes one hour and costs 0 rubles; it can easily be used in sport fishing.

How to catch

Screw 20 m of 0.08-0.12 mm fishing line onto the cork gutter.
Pass the line through the rings on the whip.
Pass the fishing line into the flattened tube (ballpoint pen) on the nod.
Pass the line through the rings on the nod.
Tie a jig (or a hook with a nozzle).
Gradually removing the fishing line from the cork fishing line, lower the jig to the very bottom of the reservoir.
Hit the jig on the bottom of the reservoir a couple of times.
Gradually wind the fishing line onto the cork fishing line and play with bait, waiting for a bite.
If there is a bite, hook the fish with a rod.
Put the rod aside and move the line with your hands to pull the fish onto the ice.
Remove the fish from the hook.
Wind the fishing line around the cork.

Fishing rod type "filly" with a wooden handle

"Filly" Can be used for jig fishing and float fishing.

We saw off a 14-16 cm piece from the wooden handle of an old, unnecessary mop. This will be the handle of the fishing rod.
Line storage device.
- wooden cylinders 2 pcs. 3-5 cm high with a hole drilled in the center of the circle for screws (you can use the wooden handle of a children's net). 1 cm from the edge of the cylinder, use a knife to make a 2 cm wide depression for storing fishing line;
- standard wooden thread spool with a sawn-off edge (the height of the spool without one edge is 3.5 cm) 2 pcs.
Screw 2 coils or 2 cylinders along the edges of the handle.

Expert opinion

Knipovich Nikolai Mikhailovich

Zoologist, hydrobiologist. I am interested in fishing at a professional level.

Important! As an economical option, you can simply drive two nails of suitable diameter along the edges of the handle so that the nails, together with the head, protrude 3-5 cm from the handle.

Drill a hole in the handle in the center of the circle for the whip, 6–8 cm deep and with a diameter equal to the maximum diameter of the whip.
Fill the hole for the whip with epoxy resin. Insert a 21-28 cm whip (the elbow from an old telescopic rod). The whip must be strong and have rings for threading the fishing line. Remove excess resin with a rag.
To prevent wooden parts from getting wet and icing, they can be covered with stain and varnished, or painted with façade paint for wood.
To use the filly for jig fishing, a nod is attached to the whip in the same way as in step 4 from the “Nod” section.

With an open reel for trolling, jig fishing, float fishing

In a real balalaika, the inertial reel with a stopper is recessed into the round handle of the fishing rod. Making such a coil yourself at home is problematic.

You can glue a used line spool to the handle of your fishing rod, but then you have to wind the line onto the spool by hand.

You can use a purchased inertial coil, but the manufacturing process will be much more complicated - you will have to cut a round hole in a round handle, and come up with a reliable way to attach the coil inside the handle hole.

Much It’s easier to use an inexpensive commercial inertial coil(from 30 rubles) and attach it to the handle of the fishing rod with insulation or drill two holes in the reel holder and secure it with screws on the handle.

With wooden handle and open inertia reel

A 20-22 cm long section is sawn off from the wooden handle of an old, unnecessary mop.
Cork chips are mixed with waterproof glue and gradually, layer by layer, applied to the handle at the place where the hand grips (10-12 cm). You can create a convenient handle shape according to the angler’s request.
After the glue has dried, sand the handle with fine sandpaper (you can coat the handle with yacht varnish).
In the center of the wooden handle, on the side where the whip is attached, a longitudinal hole is drilled to a depth of 6-8 cm with a diameter equal to the diameter of the thick end of the whip.
The resulting hole is gradually filled with epoxy resin.
Insert a whip from an unnecessary telescopic fishing rod 40-70 cm long. Carefully center the whip in place.
Carefully remove the protruding resin.
After the resin has hardened, sand the place where the whip is fixed in the handle with fine sandpaper to remove irregularities and resin build-ups.
A purchased inertial reel with a brake is screwed to the handle.

Expert opinion

Knipovich Nikolai Mikhailovich

Zoologist, hydrobiologist. I am interested in fishing at a professional level.

Attention! There are inertial reels with and without a holder, with a hole in the center for attaching the reel with a screw. It's better to buy more cheap option with a central hole. To install such a reel on the handle, you will need one screw of a certain length for reliable fastening.

Such a fishing rod can be used with a nod for jig fishing. It can also be used for float fishing and trolling. In these cases the nod is not used.

Pistol

Winter fishing rod with pistol grip used for trolling in currents and still water. Since the structure is subjected to heavy loads when attacked by predatory fish, its handle can be made of hard material - wood.

The required pistol-shaped handle shape is cut from a block of wood.
The final rough shape of the handle and line holder is planed with a knife.
The forest storage facility is located on top of the pistol and has a random appearance. The main thing is that the fishing line is convenient to wind onto the fishing line.
The final shape is achieved by sanding the surface with fine sandpaper.
The handle is treated with stain and covered with deck varnish.
A hole is drilled in the horizontal arm of the handle for the whip (the whip must be strong and flexible. The tip of a spinning rod with a test of 10–30 is suitable).
Waterproof glue is applied to the whip at the junction with the handle. The whip is inserted into the hole.

When catching a predator with a fishing rod of this design, the hand experiences less stress when jerking a heavy fish. Often winter fishing rods for trolling are equipped with a hand loop made of strong rope to prevent the pike from snatching the light rod. For a pistol, there is no need for a rope loop.

Materials suitable for winter fishing rod handles

Light material is suitable for jig and float fishing, since it is intended to catch peaceful fish and the handle will not experience strong jerking loads, but the fisherman’s hands may “fall off” if he has to constantly pull a heavy fishing rod for several hours in a row in the cold.

cork;
dense foam;
foamed PVC.

These materials are not suitable for glittering. You need a durable material that will not collapse under heavy load.

Such material should have low thermal conductivity so that your hands do not freeze. It is desirable that the weight of the material is not too large.

Naturally, this is a tree.

There is another option for making handles - epoxy resin.

Cured epoxy resin:

slightly inferior in strength to wood;
lighter than wood;
thermal conductivity is lower than that of wood.

At the same time, you can make any complex and fancy shape for pouring pens. It can be used for all types of winter fishing.
Pouring handles of any shape from epoxy resin:

In a semi-hardened gypsum solution, you can gradually create any complex impression using various objects. You can immediately immerse up to half the whip in a semi-hardened gypsum solution.
Epoxy resin is poured into the hardened gypsum solution.
Another portion of gypsum solution is poured into another container. An impression is made into the semi-hardened gypsum solution in this container for the second half of the product - a mirror image of the first half.

Simple design for automatic cutting shown in the drawing and consists of:

Rectangular platform 10x20 cm for attaching a winter fishing rod of any shape. A simple option is to fasten the fishing rod handle to the platform with plastic ties and clamps.
On the back side of the platform in the middle, nails are driven in and bent to form brackets for the pipe and for the springs.
A frame permanently fixed to the base with a top crossbar made of a tube.
Two springs with rings.

Operating principle:

The fishing rod is placed on the platform and secured with ties. The springs are put on the hooks in rings. It is important that the platform is horizontal. When a bite occurs, the platform tilts, the ring of the first spring flies off the hook, the edge of the platform rises sharply along with the fishing rod, and the fish is caught.

Useful video

Coming up with new designs, improving existing ones, experiencing the joy of creativity and enjoying a good catch, saving money - this is self-production fishing gear.

Knipovich Nikolai Mikhailovich

Zoologist, hydrobiologist. Graduated from Leningrad State University named after Zhdanov, Faculty of Biology and Soil Sciences. I am interested in fishing at a professional level.

Despite the rich assortment of gear for any time of year in fishing stores, fans of ice fishing do not stop inventing homemade winter fishing rods. The main reason does not lie in the desire to save money, although this factor is present. For most domestic fishermen, only homemade fish can provide preferences in both convenience and efficiency. And for many residents of remote areas, due to the lack of specialized stores, making fishing gear is a common thing.

Winter gear is compact and simple, because ice fishing requires the presence of an angler right at the hole. Thanks to this, there is wide scope for creativity and new inventions. What kind of fishing rods do fishermen make for ice fishing?

All homemade fishing rods for winter fishing can be divided into several categories according to the fishing method. Ice fishing is a multifaceted hobby for millions of Russians, everyone finds their favorite niche.

Lovers of elegant fishing for white fish use float rods. They are equipped with an attached jig or regular hooks with a sinker. For such fishermen, the fishing rod must have a stable position on the ice, and the supply of fishing line can be stored on a small reel or on the handle of the tackle. A striking example of such a homemade product is the filly fishing rod, which owes its name to its resemblance to a horse. Most often this is a nodless fishing rod for stationary fishing.

Another category of fishermen prefers to actively fish with a reelless jig. With this method of fishing, the fishing rod is in the hands throughout the fishing, it rises up and down, the angler gives the jig trembling and oscillating movements. To prevent your hand from getting tired, the rewinder is made light and comfortable. Many options have been invented where the handle is made of cork or foam, but the main role is played by the nod.

To catch predators with a balance beam and a spoon, fishermen make the longest fishing rods. Sheer trolling involves throwing an artificial bait above the bottom, where it should entice a predator to bite. Therefore, the whip is made long and rigid, it is equipped with an elastic guard, and the handle can be made of wood or foam. It is important that your hands are warm and comfortable to hold the tackle.

Postavushki are considered gear for passive fishing of such types of fish as perch, pike perch, trout, rotan. Live bait or other bait is attached to the hook, the equipment is lowered into the hole, and the fishing rod is installed in a vertical position with a slight slope towards the hole. The bite is determined by the bright guard. Usually, several positions are installed, and the angler takes such a position to clearly see all the gear (read more about choosing live bait for fishing in our article).

Materials for creating winter fishing rods

The main elements of ice fishing gear are the handle and the whip. They can be made from different materials. Before you make a winter fishing rod at home, you should choose the most suitable options for yourself.

What is a whip made of?

The whip bears serious responsibility for the quality of the drive and the effectiveness of the hook. Therefore, this homemade element must be optimal in length and rigidity. Manufacturers of budget fishing products usually use materials such as polypropylene or polystyrene. They deform or break quite quickly.

A good polymer for making a whip is fiberglass. It is suitable for most types of winter fishing rods.
When you need to break through the hard mouth of a pike or pike perch, it is better to use a carbon fiber whip.
The traditional material for making whips has long been juniper. Some fishermen still use it successfully on their fishing rods.

As for the length of the whip, for jig tackle it is limited to 20-30 cm; spinners use longer elements (50-70 cm).

Handle materials

One of the main requirements for the handle is convenience, lightness and comfort. But it must be hard enough for the whip to be firmly attached.

Our grandfathers made handles mainly from wood. It is pleasant to hold even with your bare hand, it is well processed and is durable.
Today, wood has been replaced by modern materials such as cork, dense foam, and expanded polystyrene. They are light and buoyant, can be processed well, and do not freeze.

The best homemade products for winter fishing, manufacturing examples

A lot of homemade products have been invented that differ in the complexity of production, weight, and cost. Every fan of ice fishing wants their DIY winter fishing gear to be simple, affordable and effective. Therefore, we will dwell on several options that any angler can implement.

Creating a rewinder for 10-15 minutes

Using baitless jigs such as “devil”, “goat”, “uralka” or “nymph” allows you to catch roach, bream or perch without baiting small bloodworms in the cold. But to give these lures a believable action, a light and sensitive rod is required. It can be done in 10-15 minutes if you prepare all the necessary parts in advance.

A small handle can easily be made from a champagne cork or a piece of foam, giving it the desired shape. The handle will also serve as a kind of reel for storing a supply of fishing line.

Photo 1. Cork reel handle.

Useful advice! It is necessary to make a small groove on the handle so that the fishing line does not fly off the fishing rod on its own. This can be done with a utility knife and sandpaper.

A transverse through hole is drilled approximately 1 cm from the edge. Its diameter depends on the thickness of the whip.
A plastic rod, a lollipop tube, the tip of an old telescopic fishing rod, etc. can be used as a whip.
A nod made of a PET bottle or X-ray film is mounted to the whip using a cambric. Another piece of insulation is glued on top to allow the fishing line to pass through. A hole is made at the end of the nod or a cambric is glued.
All that remains is to adjust the operation of the tackle by winding a fishing line of 0.08-0.12 mm and tying a jig. The approximate weight of such a fishing rod will be 10-20 g. Due to the simplicity and low cost of manufacturing, you can make several different models under the existing jigs.

Photo 2. A whip made from a plastic knitting needle of a children's umbrella.

Photo 3. The whip is inserted into the cork-handle.

Photo 4. Film nod.

How to “ride” a filly?

Unusual name This winter fishing rod attracts the interest of novice anglers. Filly is the general name for a whole layer of tackle for float fishing, which has an unusual handle shape. It allows you not only to hold the whip and store a supply of fishing line, but also to give the fishing rod a stable position on the ice.

The most time-consuming and difficult task in making a filly will be cutting out the handle. The material used is rigid foam. Processing is carried out using a stationery knife, file, sandpaper. In the classic version, there should be a protrusion at the top of the handle for winding fishing line, and two wide legs at the bottom. A longitudinal hole is made in the end part to a depth of 20-30 mm for the whip.
The role of a whip can be played by a standard purchased product, the tip of an old spinning rod, a feeder, or just a juniper twig.
The nod is made in case the angler has to move away from the hole or wants to play a little with the bait in the upper layers of the water. A guard made from a PET bottle, X-ray or steel plate is suitable for this purpose. A high-voltage automotive wire or several cambrics are used as a holder.

The advantage of the filly is its high degree of buoyancy. Even if he misses a bite, the fisherman will not lose his gear. The handle will play the role of a rescue buoy.

Making tackle for trolling

A good catch of pike, perch or pike perch can be ensured by a homemade fishing rod for an angler. Sheer fishing involves constant vertical play with artificial bait. It is performed in different water levels, so it is better to equip the product with a coil. To complete the set, you can use a simple inertial plastic model, a small meat grinder or a modern multiplier.

One of the main requirements for a lure is the rigidity of the whip. It is better to make it from a feeder quiver tip or the tip of a spinning rod 50-70 cm long. This is especially important when catching pike perch and pike.
The handle can be cut from moisture-resistant wood or plastic products can be used, covering them with a layer of cork. To do this, the cork is crushed and glued to the handle. Usually several layers are applied, after the glue has completely dried, rough abrasive processing and subsequent sanding are carried out.

The reel is attached to the handle using tie clamps and electrical tape.
The spinner can be additionally equipped with a nod if the whip is hard and the spinners and balancers are light. It can be made of a wire spring, steel or Mylar plate. For mounting on a whip, it is better to use special holders.

Photo 5. Fishing rod for trolling from scrap materials.

When a fisherman wonders how to make a fishing rod for winter fishing, you should immediately pay attention to the materials at hand. Many fishing masterpieces are made from unnecessary items. At the same time, the fishing rods are distinguished by their convenience and high catchability.

Buy at good discounts for personal use and as a gift to friends and acquaintances.

Buy quality products at affordable prices V . Give gifts to yourself and your loved ones!

Subscribe to us on Facebook, Youtube, VKontakte and Instagram. Stay up to date with the latest site news.

How to make a fishing rod for winter fishing with your own hands?

Many anglers who are keen on hole fishing make their own fishing rods for winter fishing. There's nothing complicated about it. Almost everyone can cope with this task. In this article we will tell you how to make nockless winter fishing rods with different sensitivity.

We will make winter fishing rods 35-37 cm long. We will make the handle from hard foam 4 mm thick. The length of the handle will be 8 cm. These are the fishing rods you should get:

Work order

To make fishing rods for winter fishing, we will need polystyrene foam with the above parameters, a tape measure, a drill and bits, a ruler, superglue, a sharp knife, a triangular file, electrical tape, an awl, and carbon nods. First, we cut out blanks for handles 8 cm long and 15 and 20 mm wide. We measure the required width and cut the blanks with a knife:

As a result, we should get these blanks for the handles.

After this, we need to draw a line along which we will insert the whips. Take a pencil and draw a line at a distance of 5 mm from the edge of the workpiece:

Then we take an awl and mark a hole through which the whip will pass. The hole should be placed on the drawn line:

The next step is drilling the hole. For this operation we will use a drill and a drill bit of the same thickness as the thickness of the whips at the base. When drilling the first centimeters, you must ensure that the drill does not go beyond the line. After it goes a few centimeters, you can safely drill:

We drill from the back side in the same way. We should have a through hole. We pull the whip through it and make sure that we did everything right.

The next stage of making a fishing rod for winter fishing with your own hands is cutting out holes in the handle. They are necessary to lighten the weight of the fishing rod. In principle, they don’t have to be cut out, since the foam itself is lightweight.

First you need to make markings using a ruler:

The markings are as follows: we retreat 1 cm from the edge, 1.5 cm is the size of the holes, 1 cm is the distance between the holes. Using a 4.5 mm drill we make 4 through holes

After this, we use a knife to make slits in place of the holes. It should look like this:

Then you need to make slots at each end for the fishing line:

As a result of all the cutting, we should get handles like these for winter fishing rods.

At the next stage, we need to cut the whips to the required length. As a rule, their length is longer than we need. Therefore, we will cut off part of the whip. Since the total length of the fishing rod for winter fishing will be 35-37 cm, the length of the whip in our case should be 6 cm less so that its end coincides with the end of the first hole. Using a tape measure, mark the required length:

We wrap a piece of electrical tape at the cut point.

This work must be done very carefully, since carbon is a rather vulnerable material. We are in no hurry. With measured movements, only slightly pressing, we make a slot. The ends are empty inside, so after cutting, we flare the inside of the product a little with the same needle file:

This must be done in order to sharpen the edges so that the fishing line is not damaged during fishing. In the same way we saw through another whip. Next, we place the whip on the handle to the place rewound with electrical tape. It will not allow the whip to go to great depths. We coat the part of the whip that should be inside the handle with superglue and push it inside it.

The handles can be painted in bright colors if desired. This will always keep your homemade ice fishing rods in sight.

The final stage is the equipment of the tips. To do this, you can take a cotton swab and cut two pieces of 1 cm long from it. We thread the piece onto the whip, before heating one end with a lighter.

We got very light fishing rods. Their weight varies between 3-5 grams. This is a very important parameter. When fishing with light jigs, you will feel the most gentle bite.

Conclusions

As you can see, making a winter fishing rod is not at all difficult. If necessary, you can make fishing rods with different sensitivity. When making it, it is necessary to take into account the dimensions of the winter box so that the fishing rods fit in it.

They will allow you to purchase any at competitive prices!

Subscribe to us at - we publish a lot through them interesting information, photos and videos.

Popular sections of the site:

It will allow you to understand how all fish bite depending on the time of year and month.

The page will tell you about many popular tackles and devices for fishing.

We describe in detail living, plant, artificial and unusual.

In the article you will get acquainted with the main types, as well as tactics for using them.

Study everything to become a real fisherman and learn how to make the right choice.

Making a winter fishing rod with your own hands at home is not difficult. At the same time, it is important to understand the characteristics of the type of fishing for which the gear is being prepared. The fishing rod required for an active jig is not the same as for float fishing with a riser. A number of fishermen use, in principle, only homemade gear, while others modify store-bought options. It makes no difference whether the tackle is made independently or purchased in a store. A person catches fish using knowledge and skills, and a fishing rod is just a tool. Winter gear, due to its small size, is not as demanding on materials as long summer gear. You can literally make them on your knees using improvised materials. In this article we will look at how to make a homemade winter fishing rod. Let's look at various schemes and tips for homemade fishing rods for winter fishing.

Sparklers

Homemade gear for winter fishing with spoons, balancers and other artificial baits for predators differs from ordinary fishing rods in caliber. However, the thinnest and lightest fishing rods for noddleless trolling are somewhat similar to reelless ones. Tackle for trolling deserves a separate discussion. Peculiarities self-made such fishing rods are outlined in a separate article. In this publication, we will look at how to make a winter fishing rod yourself for regular fishing, with a nod or a float, as well as for active fishing with jigs and reelless baits.

Stationary fishing

Stand-up fishing is a classic of winter fishing that many beginners start with. It’s easiest to make a winter float rod (or nod) for stand-up fishing. There are no requirements for such a fishing rod that affect the performance of the jig. The main function is to store a supply of fishing line, ease of installation on ice, and quickly bring it into working position. The basic design is simple:

A device for storing fishing line (reel or reel);
A handle (often together with a reel, as on a filly, or with a reel, as on a balalaika);
Whip;
Legs (optional).

The specific option depends on what the fisherman is going to make it from. It is not the peculiarities of fishing tactics that are of great importance, but rather the personal preferences of anglers. An absolute plus of homemade products is that everything is made for yourself. The process of making winter fishing rods with your own hands with a float or nod, in essence, connecting the whip and handle, reel (reel) into a single whole. In stationary fishing, the equipment of the fishing rod itself is more important, and not the fishing rod, which performs secondary functions. Therefore, when making or thinking through the design of a fishing rod, an angler can take certain liberties.

The simplest do-it-yourself winter fishing rod, a filly, is made from a piece of hard foam or other similar material. Previously, the filly's body was carved from wood. Now it is advisable to use polystyrene foam or other plastics - they are easy to obtain and process. And they are much lighter in weight than wood. The process of making a winter fishing rod from polystyrene foam or polystyrene foam with your own hands takes a few minutes. Reels are cut from a block of material with a knife, then the workpiece is processed with sandpaper or a file. The whip is glued into the filly with epoxy resin or any glue that does not dry out in the cold and does not corrode the foam.

You can use store-bought polycarbonate or vinyl sixes or debris as a whip. summer gear, as well as improvised materials - for example, plastic knitting needles from an umbrella or the feathers of a broom. In principle, such a fishing rod can already be used on a pond. The line is wound onto the reel, passed through the cambric (nod connector) on the whip and equipped. If you get confused, you can devote more time to this workpiece for the sake of ethical beauty - properly sanded and painted.

With handle and reel

You can make a fishing rod for winter fishing with a reel. This type of gear is more convenient for use at depth. Making it is not much more difficult than a filly. The principle is the same, just instead of cutting out the reel, a reel is attached to the handle. The handle of such a winter fishing rod is made by hand from any suitable materials. Polystyrene foam, cork, wood, mop handles, fluoroplastic, plastics - the list goes on and on. The simplest way– put several wine corks on the whip and place it on glue. A homemade winter fishing rod with a reel is made in various versions, as long as the design meets the fishing requirements. There are a lot of homemade products on the pond. This is a huge field for experimentation.

An important point is to think in advance about the result you want to get. A lightweight small fishing rod is suitable for catching small fish in the shallows. When fishing in currents and depths with bottom rigs, you will need a fairly massive fishing rod that can stand stably above the hole when the current affects the fishing line. You can attach a lead plate to the handle for counterweight - so that the fishing rod does not dive like a whip into the hole. A good idea can be borrowed from winter trout fishermen - place a 20 cm student's ruler on the whip. Then a large crucian carp or bream will not be able to drag the fishing rod into the hole from a gaping angler.

Fishermen often make homemade winter fishing rods just for the sake of the process. At the same time, do not forget about the fishing conditions for which the tackle is made. It is impossible to fully describe all the options - each master considers his own design to be the best. For practicality purposes, the simpler the better. If there is a desire to tinker, we collect more complex options while passing the time in the off-season. If you try, you can carve a balalaika from wood. The end result is to achieve smooth rotation of the coil in the cut-out niche. The simplest winter fishing rod and reel with your own hands is a whip, a handle and a small summer reel attached to it with electrical tape. For stand-up fishing, it is useful to equip fishing rods with legs.

Legs

When equipped with a float, the fishing rod can simply be placed on the ice next to the hole when fishing. But for nodding installations, the whip is placed directly above the hole for the correct position of the guard. For ease of installation, such fishing rods are equipped with legs. You can make legs for a winter fishing rod with your own hands from any suitable materials. The simplest thing is to twist a wire or attach an ordinary clothespin to a whip. The trout fishing ruler is both legs and protection against the tackle being dragged into the hole.

Equipment

If the configuration of the fishing rod allows some liberties in the design, then the equipment requires increased attention from the angler. This is the most important part of the tackle, which catches fish directly. Depending on the fishing conditions and the type of fish, different ones are used, with a nod or a float. The float rig is adjusted so that when lifting the hook with a hook (jig) from the bottom, the fish does not feel the weight of the bait. To do this, the float and weight are adjusted so that the entire equipment has a slightly negative buoyancy. This is the only way the float will compensate for the weight of the bait when it surfaces. ABOUT .

Nodding installations are made according to the same principle. Here the compensating function is performed by a correctly configured guard. ABOUT .

Attachment jig and reelless jig

For active play, do-it-yourself ice fishing rods are made more carefully. All components are important here:

Lightness of gear;
Elasticity of the whip;
Correspondence between the caliber of the fishing rod and the fineness of the equipment.

The bone in its minimal version is perfect for use with devils and heavy borers. More often, such tackle is used for trolling with light baits. However, nothing prevents you from making it in a lighter version and using it with a jig. This is something between a filly and a puck. The reels are machined into a slightly different shape.

In jig gear, the six itself is more important, and not the line storage system. If you have the required tip, you can simply attach two eyes to its lower part for winding the fishing line - you will get a miniature and sensitive fishing rod.

Game fishing equipment

Do-it-yourself fishing rod rigging for ice fishing for game is made according to all the canons and rules of winter jigs. The main point is the correspondence of the thickness of the fishing line, the weight of the bait and the elasticity of the guard (no-kick six). Experienced jig makers prepare a whole set of gear for different conditions, so as not to have to deal with tying while fishing. More details can be found in the block of articles on our website about jigs and reelless jigs.

Views